Before starting WPC fence installation, let’s introduce WPC first.
Wood-plastic Composites Description
Wood-plastic, that is, wood-plastic composites (WPC), is a new type of composite material that has flourished in recent years. It involves replacing the usual resin binders with polyethylene, polypropylene, and polyvinyl chloride and mixing more than 35%-70% of waste plant fibers such as wood flour, rice husk, and straw to form a new wood-based material, which is then molded by extrusion. WPS fence installation is also easy to do.
PE wood-plastic materials have excellent waterproof and corrosion resistance, high hardness, easy-to-change shape and flexure by heat, but the use of thickened or porous hollow structures is effective. Both PVC and PE WPC fence can be easily installed as well
Table of Contents
WPC Fence Installation Method Step by Step
-First Step. Buy WPC fence panels; you can buy fence panels from a local building materials supermarket. If the quantity you need is large, more than 300 square meters, you can choose direct total HOSUNG WPC import.
–The second part. Find a nearby installer or fencing company or contractor or installer to install the fence panels.
–If you want to do DIY by yourself, then fun is also possible, our reference video can give you a reference; this reference video is also for businessmen who buy HOSUNG WPC wpc fence panels as a guide video.
Please take note of the following text: These installation guidelines will guide you through the process of installing HOSUNG products. While HOSUNG recommends these installation methods, they may only cover some installation scenarios. Each installation has unique performance needs, so it’s up to the installer to choose the best way to install it. For peace of mind, we recommend that a licensed architect, engineer, or local building official review all designs before installation.
Before Installation
- Make sure the ground is clear and prepared along the proposed fence line.
- Never use HOSUNG WPC fencingWood Plastic Composite fencing as a gravel board or a structural product.
- Always bolt the bases to firm foundations. Do not bury them into the ground.
- Please don’t bury the bottom of the fence.
- A minimum gap of 30mm must be allowed for drainage at the bottom of each fence panel. Gravel can be used to hide the gap.
- Do not fix posts to hollow bases such as breeze blocks.
- To prepare for installing a fence, walk where the wall will be located to check for any obstacles or obstructions. Then, use stakes and string to outline the fence line and mark the locations for any gates. To lay out the fence, measure the length of the fence line and create a drawing that includes the gate locations. Since standard fence sections may not perfectly align with the layout, you must decide on a spacing method to accommodate the actual dimensions. You can cut each fence section to the same width for equal spacing or install the sections as they are supplied and cut one section to fit any remaining space in each layout segment.
- Getting Materials Ready: To calculate the amount of HOSUNG fence material needed, first divide the length of the segment by the width of a standard section of fence and round up to the nearest whole number. When determining the amount of fencing required, adding approximately 10% to the total is suggested to account for waste.
- Expansion and Contraction HOSUNG fencing planks will expand and contract with changes in temperature. This is most noticeable in areas with extreme temperature changes. The change in length is most significant during the installation process and should be considered when working in extreme temperatures. To ensure you are fully prepared for this, if you cut your planks during a hot afternoon, let them sit outside overnight in the cool air, and then install them the next morning, you will notice some amount of Contraction. To minimize this issue, it’s best to fasten your planks after cutting them as soon as possible.
How To Fix The Aluminum Post on Earth?
- Keep 1842mm as the distance from each two posts middle.
- Dig a cylindrical hole 720 mm deep and 280 mm in diameter
- Place 150mm of gravel at the bottom of the holes.
- Put the aluminum posts vertically into the holes.
- Pour concrete to the hole until there is 50mm depth to the ground level.
- Then fill with sand to ground level.
How to Fix The Fencing On Concrete Floor?
- Drill holes on the ground using an impact drill aligning with the holes on the post holder.
- Secure the post holder to the ground using expansion bolts.
- Repeat the process and the distance between two adjacent post holders is 1842mm.
- Put the aluminum posts onto the post holders, which is 1830mm.
- Put the post sleeves onto the aluminum posts and slide down slowly.
- Secure the corner brackets to the aluminum posts.
- Insert the bottom rail and slide down onto the corner brackets.
- Insert the fancing broad.
- Secure a straight bracket on each side of the aluminum connection rail. Insert the aluminum connection rail and secure to the aluminum posts.
- Insert the decorative screen.
- Insert the aluminum connection rail and secure to the aluminum posts.
- Insert the decorative screen.
- Insert the post inserts with a suitable length.
- Cover the post caps onto the top of the aluminum posts.
HOSUNG is a WPC fencing manufacturer in China. Looking for high-quality WPC decking, wall panels, and fencing? Look no further! Our Chinese manufacturing company is the perfect source supplier for WPC importers, installers, and wholesalers. Our products are ideal for outdoor plank roads, parks, and courtyard projects made of WPC materials.
Besides the WPC fence installation, for more WPC installation videos, feel free to ask us.
